// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with some width, height, and transformation.
LayoutView view = host.CreateView(500, 300, Matrix.Identity);

// Create lists for blue and green rectangles.
var blueList = new List<LayoutRect>();
var greenList = new List<LayoutRect>();

// Create LayoutRect. LayoutRect is a rectangle whose sides are parallel to the owner LayoutView sides.
LayoutRect rect = view.CreateRect();

// Set a constraint on the rotation angle of the LayoutRect.
rect.SetAngle(null, 90);

// Set width, height, and center point.
rect.SetWidth(120);
rect.SetHeight(80);
rect.SetHorizontalCenter(null, AnchorParam.VerticalCenter);
rect.SetVerticalCenter(null, AnchorParam.HorizontalCenter);

// Add the LayoutRect to the blue list.
blueList.Add(rect);

// Add a green LayoutRect to the blue LayoutRect.
AddGreenRect(rect);

// Add a tiny green rectangle at the bottom left corner of the blue rectangle.
void AddGreenRect(LayoutRect r0)
{
    var r1 = view.CreateRect();
    r1.SetWidth(r0, AnchorParam.Width, 0, 0.125f);
    r1.SetHeight(r0, AnchorParam.Height, 0, 0.125f);
    r1.AnchorBottomLeft(r0, 5, 5);
    greenList.Add(r1);
}

// Create two more blue rectangles and place them at different places in the LayoutView.
// Add green rectangles to the blue rectangles.
rect = view.CreateRect();
rect.AnchorTopLeft(null, 0, 0, 120, 80);
blueList.Add(rect);
AddGreenRect(rect);

rect = view.CreateRect();
rect.AnchorBottomRight(null, 0, 0, 120, 80);
blueList.Add(rect);
AddGreenRect(rect);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(600, 400));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

var pen = new Pen(Color.Coral, 2);

// Set the transformation matrix of the LayoutView when creating the view.
var m = Matrix3x2.CreateTranslation(20, 20);
gr.Transform = view.Transform.Multiply(m);

// Draw a rectangle with the corresponding values of the LayoutView.
gr.DrawRectangle(view.AsRectF(), pen);

// Draw blue rectangles.
pen.Color = Color.CornflowerBlue;
for (int i = 0; i < blueList.Count; i++)
{
    rect = blueList[i];
    gr.Transform = rect.Transform.Multiply(m);
    gr.DrawRectangle(rect.AsRectF(), pen);
}

// Draw green rectangles.
pen.Color = Color.LightGreen;
for (int i = 0; i < greenList.Count; i++)
{
    rect = greenList[i];
    gr.Transform = rect.Transform.Multiply(m);
    gr.DrawRectangle(rect.AsRectF(), pen);
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with width and height.
LayoutView view = host.CreateView(600, 300);

// Create a left vertical line by setting AnchorParam to left.
var bL = view.CreateRect();
bL.AnchorVerticalLine(null);
bL.SetLeft(null, AnchorParam.Left);

// Create a right vertical line by setting AnchorParam to right.
var bR = view.CreateRect();
bR.AnchorVerticalLine(null);
bR.SetRight(null, AnchorParam.Right);

// Create a blue rectangle and set its AnchorParam.
var r1 = view.CreateRect();
r1.SetTop(null, AnchorParam.VerticalCenter);
r1.SetWidth(120);
r1.SetHeight(80);
r1.SetLeft(bL, AnchorParam.Right, 20);

// Create a green rectangle (rotated 270 degrees or 90 degrees counterclockwise) and set its AnchorParam.
var r2 = view.CreateRect();
r2.SetAngle(r1, 270);
r2.SetLeft(r1, AnchorParam.Bottom);
r2.SetWidth(200);
r2.SetHeight(80);
r2.SetTop(r1, AnchorParam.Right, 20);

// Create a violet rectangle and set its AnchorParam.
var r3 = view.CreateRect();
r3.SetAngle(r1, 0);
r3.SetBottom(r1, AnchorParam.Top);
r3.SetHeight(80);
r3.SetLeft(r2, AnchorParam.Bottom, 20);
r3.SetRight(bR, AnchorParam.Left, -20);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(700, 400));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);

// Draw the vertical lines and rectangles.
DrawRect(bL, Color.Coral);
DrawRect(bR, Color.Coral);
DrawRect(r1, Color.CornflowerBlue);
DrawRect(r2, Color.Green);
DrawRect(r3, Color.Violet);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with some width and height.
LayoutView view = host.CreateView(900, 300);

// Create a left vertical line by setting AnchorParam to left.
var bL = view.CreateRect();
bL.AnchorVerticalLine(null);
bL.SetLeft(null, AnchorParam.Left);

// Create a right vertical line by setting AnchorParam to right.
var bR = view.CreateRect();
bR.AnchorVerticalLine(null);
bR.SetRight(null, AnchorParam.Right);

// Create blue, green, and violet rectangles.
var r1 = view.CreateRect();
r1.AnchorTopBottom(null, 100, 100);

var r2 = view.CreateRect();
r2.AnchorTopBottom(null, 100, 100);

var r3 = view.CreateRect();
r3.AnchorTopBottom(null, 100, 100);

var r4 = view.CreateRect();
r4.AnchorTopBottom(null, 100, 100);

var r6 = view.CreateRect();
r6.AnchorTopBottom(null, 100, 100);

// Create a green rectangle rotated 90 degrees.
var r5 = view.CreateRect(); 
r5.SetAngle(null, 90);
r5.SetLeft(null, AnchorParam.Top, 20);
r5.SetRight(null, AnchorParam.Bottom, -20);

// Create a chain of rectangles by setting the AnchorParam. The SetLeftAndOpposite and SetBottomAndOpposite methods are used to set chained position constraints.
r1.SetLeft(bL, AnchorParam.Right, 20);
r2.SetLeftAndOpposite(r1, AnchorParam.Right, 20);
r3.SetLeftAndOpposite(r2, AnchorParam.Right, 20);
r4.SetLeftAndOpposite(r3, AnchorParam.Right, 20);
r5.SetBottomAndOpposite(r4, AnchorParam.Right, -20);
r6.SetLeftAndOpposite(r5, AnchorParam.Top, 20);
r6.SetRight(bR, AnchorParam.Left, -20);

// Set the star and fixed widths.
r1.SetStarWidth(2);
r2.SetStarWidth(4);
r3.SetWidth(50);
r4.SetStarWidth(2);
r6.SetStarWidth(2);

// Set the star height as this rectangle is rotated.
r5.SetStarHeight(4);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(1000, 400));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);

// Draw the vertical lines and rectangles.
DrawRect(bL, Color.Coral);
DrawRect(bR, Color.Coral);
DrawRect(r1, Color.CornflowerBlue);
DrawRect(r2, Color.Green);
DrawRect(r3, Color.Violet);
DrawRect(r4, Color.CornflowerBlue);
DrawRect(r5, Color.Green);
DrawRect(r6, Color.CornflowerBlue);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with some width and height.
LayoutView view = host.CreateView(600, 400);

// Create an outer rectangle.
var rOuter = view.CreateRect();
rOuter.AnchorExact(null);

// Create an inner rectangle.
var rInner = view.CreateRect();
rInner.AnchorBottomLeftRight(rOuter, 50, 50, 50);

// Create rectangles.
var r1 = view.CreateRect();
r1.AnchorTopLeft(rOuter, 20, 50, 200, 60);
var r2 = view.CreateRect();
r2.AnchorTopRight(rOuter, 50, 50, 40, 40);

// Set the position of the inner rectangle according to the other rectangles.
rInner.AppendMinTop(rOuter, AnchorParam.Top, 50);
rInner.AppendMinTop(r1, AnchorParam.Bottom, 20);
rInner.AppendMinTop(r2, AnchorParam.Bottom, 20);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(700, 500));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);

// Draw the rectangles.
DrawRect(rOuter, Color.Coral);
DrawRect(rInner, Color.CornflowerBlue);
DrawRect(r1, Color.Green);
DrawRect(r2, Color.Green);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with some width and height.
LayoutView view = host.CreateView(600, 400);

// Create main rectangle.
var rMain = view.CreateRect();
rMain.AnchorExact(null);

// Create anchor points.
var ap1 = rMain.CreatePoint(1f / 3, 1f / 3);
var ap2 = rMain.CreatePoint(2f / 3, 1f / 3);
var ap3 = rMain.CreatePoint(1f / 3, 2f / 3);
var ap4 = rMain.CreatePoint(2f / 3, 2f / 3);

// Create four rectangles and position them as per the anchor points defined.
var r1 = view.CreateRect();
AnchorCenter(r1, ap1);
var r2 = view.CreateRect();
AnchorCenter(r2, ap2);
var r3 = view.CreateRect();
AnchorCenter(r3, ap3);
var r4 = view.CreateRect();
AnchorCenter(r4, ap4);
void AnchorCenter(LayoutRect r, AnchorPoint ap)
{
    r.SetHorizontalCenter(ap);
    r.SetVerticalCenter(ap);
    r.SetWidth(20);
    r.SetHeight(20);
}

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(700, 500));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);

// Draw the rectangles.
DrawRect(rMain, Color.Coral);
DrawRect(r1, Color.CornflowerBlue);
DrawRect(r2, Color.CornflowerBlue);
DrawRect(r3, Color.CornflowerBlue);
DrawRect(r4, Color.CornflowerBlue);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

//Create rotation.
const double DegToRad = Math.PI / 180;
var m1 = Matrix.CreateRotation(DegToRad * 30);
m1 = m1.Translate(190, -50);

// Create first view and rectangle.
var view1 = host.CreateView(10, 10, m1);
var rc1 = view1.CreateRect();
rc1.AnchorTopLeft(null, 30, 30, 300, 200);

// Create second view and rectangle.
var m2 = Matrix.CreateRotation(DegToRad * -20);
var view2 = host.CreateView(10, 10, m2);
var rc2 = view2.CreateRect();

// Create anchor points.
var ap1 = rc1.CreatePoint(0, 0);
var ap2 = rc1.CreatePoint(1, 0);
var ap3 = rc1.CreatePoint(1, 1);
var ap4 = rc1.CreatePoint(0, 1);

// Add constraints relative to the anchor points.
rc2.SetTop(ap1, -20);
rc2.SetBottom(ap3, 20);
rc2.SetLeft(ap4, -20);
rc2.SetRight(ap2, 20);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(700, 600));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);

// Draw the rectangles and ellipses.
DrawRect(rc1, Color.CornflowerBlue);
DrawRect(rc2, Color.Green);
DrawPoint(ap1);
DrawPoint(ap2);
DrawPoint(ap3);
DrawPoint(ap4);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}
void DrawPoint(AnchorPoint ap)
{
    gr.Transform = ap.Transform.Multiply(m);
    gr.DrawEllipse(new RectangleF(-5, -5, 10, 10), new Pen(Color.Coral, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create first view and rectangle.
var view1 = host.CreateView(240, 300);
var rc1 = view1.CreateRect();
rc1.AnchorExact(null);

// Create second view and rectangle.
var view2 = host.CreateView(100, 150);
var rc2 = view2.CreateRect();
rc2.AnchorExact(null);

// Create third view and rectangle.
var view3 = host.CreateView(70, 50);
var rc3 = view3.CreateRect();
rc3.AnchorExact(null);

//Create rotation.
const double DegToRad = Math.PI / 180;
var m2 = Matrix.CreateRotation(DegToRad * 45);
view2.SetRelativeTransform(view1, m2.Translate(120, -100));
var m3 = Matrix.CreateRotation(DegToRad * -20);
view3.SetRelativeTransform(view2, m3.Translate(-23, 90));

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(850, 350));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Draw the first set of rectangles according to the first transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);
DrawRect(rc1, Color.CornflowerBlue);
DrawRect(rc2, Color.Orange);
DrawRect(rc3, Color.Violet);

// Draw the second set of rectangles according to the second transformation matrix.
view1.Transform = Matrix.CreateTranslation(350, 50).Scale(0.7).Rotate(DegToRad * 20);
host.PerformLayout();
DrawRect(rc1, Color.CornflowerBlue);
DrawRect(rc2, Color.Orange);
DrawRect(rc3, Color.Violet);

// Draw the third set of rectangles according to the third transformation matrix.
view1.Transform = Matrix.CreateTranslation(520, 200).Scale(0.8).Rotate(DegToRad * -70);
host.PerformLayout();
DrawRect(rc1, Color.CornflowerBlue);
DrawRect(rc2, Color.Orange);
DrawRect(rc3, Color.Violet);
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");

// Initialize LayoutHost. This defines the origin of the coordinate system.
var host = new LayoutHost();

// Create LayoutView. This defines a rectangular region with some width and height.
LayoutView view = host.CreateView(800, 400);

// Create a contour.
var contour = view.CreateContour();
contour.AddPoints(new AnchorPoint[]
{
    view.CreatePoint(0, 0, 400, 0),
    view.CreatePoint(0, 0, 600, 400),
    view.CreatePoint(0, 0, 400, 200),
    view.CreatePoint(0, 0, 200, 400)
});

// Create first row of rectangles.
var rc11 = view.CreateRect();
rc11.AnchorLeftTopBottom(null, 0, 20, 310);
rc11.AppendMaxRight(contour, ContourPosition.FirstInOutside);
var rc12 = view.CreateRect();
rc12.AnchorRightTopBottom(null, 0, 20, 310);
rc12.AppendMinLeft(contour, ContourPosition.FirstInOutside);

// Create second row of rectangles.
var rc21 = view.CreateRect();
rc21.AnchorLeftTopBottom(null, 0, 120, 210);
rc21.AppendMaxRight(contour, ContourPosition.FirstInOutside);
var rc22 = view.CreateRect();
rc22.AnchorTopBottom(null, 120, 210);
rc22.SetLeft(rc21, AnchorParam.Right);
rc22.AppendMaxRight(contour, ContourPosition.FirstInInside);
var rc23 = view.CreateRect();
rc23.AnchorTopBottom(null, 120, 210);
rc23.SetLeft(rc22, AnchorParam.Right);
rc23.AppendMaxRight(contour, ContourPosition.NextOutInside);
var rc24 = view.CreateRect();
rc24.AnchorTopBottom(null, 120, 210);
rc24.SetLeft(rc23, AnchorParam.Right);
rc24.AppendMaxRight(contour, ContourPosition.NextOutOutside);
var rc25 = view.CreateRect();
rc25.SetLeft(rc24, AnchorParam.Right);
rc25.AnchorRightTopBottom(null, 0, 120, 210);

// Create third row of rectangles.
var rc31 = view.CreateRect();
rc31.AnchorRightTopBottom(null, 0, 220, 110);
rc31.AppendMinLeft(contour, ContourPosition.FirstInOutside);
var rc32 = view.CreateRect();
rc32.AnchorTopBottom(null, 220, 110);
rc32.SetRight(rc31, AnchorParam.Left);
rc32.AppendMinLeft(contour, ContourPosition.LastOutOutside);
var rc33 = view.CreateRect();
rc33.SetRight(rc32, AnchorParam.Left);
rc33.AnchorLeftTopBottom(null, 0, 220, 110);

// Create fourth row of rectangles.
var rc41 = view.CreateRect();
rc41.AnchorLeftTopBottom(null, 0, 320, 10);
rc41.AppendMaxRight(contour, ContourPosition.FirstInOutside);
var rc42 = view.CreateRect();
rc42.AnchorTopBottom(null, 320, 10);
rc42.SetLeft(rc41, AnchorParam.Right);
rc42.AppendMaxRight(contour, ContourPosition.NextOutOutside);
var rc43 = view.CreateRect();
rc43.AnchorTopBottom(null, 320, 10);
rc43.SetLeft(rc42, AnchorParam.Right);
rc43.AppendMaxRight(contour, ContourPosition.FirstInOutside);
var rc44 = view.CreateRect();
rc44.AnchorTopBottom(null, 320, 10);
rc44.SetLeft(rc43, AnchorParam.Right);
rc44.AppendMaxRight(contour, ContourPosition.NextOutOutside);
var rc45 = view.CreateRect();
rc45.SetLeft(rc44, AnchorParam.Right);
rc45.AnchorRightTopBottom(null, 0, 320, 10);

// Calculate all rectangle coordinates based on the constraints provided.
host.PerformLayout();

// Initialize GcPdfDocument.
GcPdfDocument doc = new GcPdfDocument();

// Create a new page.
var page = doc.Pages.Add(new SizeF(900, 500));

// Initialize GcPdfGraphics.
var gr = page.Graphics;

// Define transformation matrix.
var m = Matrix3x2.CreateTranslation(20, 20);
gr.Transform = m;

// Draw the rectangles and contour.
DrawContour(contour);
DrawRect(rc11, Color.CornflowerBlue);
DrawRect(rc12, Color.CornflowerBlue);
DrawRect(rc21, Color.CornflowerBlue);
DrawRect(rc22, Color.Violet);
DrawRect(rc23, Color.Orange);
DrawRect(rc24, Color.Violet);
DrawRect(rc25, Color.CornflowerBlue);
DrawRect(rc31, Color.CornflowerBlue);
DrawRect(rc32, Color.Violet);
DrawRect(rc33, Color.CornflowerBlue);
DrawRect(rc41, Color.CornflowerBlue);
DrawRect(rc42, Color.Violet);
DrawRect(rc43, Color.CornflowerBlue);
DrawRect(rc44, Color.Violet);
DrawRect(rc45, Color.CornflowerBlue);
void DrawContour(Contour co)
{
    var pts = co.Points.Select(ap => ap.TransformedLocation).ToArray();
    gr.DrawPolygon(pts, new Pen(Color.Green, 2));
}
void DrawRect(LayoutRect r, Color c)
{
    gr.Transform = r.Transform.Multiply(m);
    gr.DrawRectangle(r.AsRectF(), new Pen(c, 2));
}

// Save the PDF file.
doc.Save("Layout.pdf");